Norilux® DCAL
abrasion resistant, chemical resistant & formable
Dual-Cure Protective Lacquer for Metals
Area of Application
Norilux® DCAL is a formable, abrasion resistant dual-cure screen printing lacquer.
Norilux® DCAL can be used as first surface protective lacquer/hard coat on metal substrates, for example aluminum. The ink systems NoriScreen® ALU and NoriPUR® can be overprinted with Norilux® DCAL as a protective lacquer. It is possible to create matt-glossy-effects on one part with this lacquer system. The over-printability as well as subsequent process steps must be tested thoroughly on each part.
Cured lacquer layers of Norilux® DCAL are resistant to chemicals and pass various “creme tests” of the automobile industry.
Characteristics
Norilux® DCAL
- available as high gloss version DCAL-6/001
- available as matt version DCAL-6/002
- can be used for overprinting silicone free UV, solvent and water-based screen printing inks
- is formable, e.g. by high pressure forming or thermo forming
- shows excellent abrasion resistance
- shows excellent resistance to chemicals
- further gloss levels are available upon request
- translucent/tinted lacquers are available
- versions containing levelling agents based on silicone compounds are available on request
- effect lacquers (e. g. sparkling effect) are available upon request
Further information can be found in our technical data sheets in the Downloads section
- Proell-Norilux-Dual-Cure Lacquer-DC-5-2021.pdf903 KB
- Flyer Proell Lacquer Systems for Screen Printing Applications - 6/2023863 KB
- Proell-Norilux-DCAL-Protective-Lacquer-Metals2 MB
- Proell-Flyer Lacquers-NoriCure-ORL-5-24.pdf937 KB
- Color Information Norilux® DC291 KB
- Matt Lacquers - Color Information153 KB
- NoriCure® HC-1 - Color Information3 MB
- Form for Technical Inquiries688 KB
