Water-based ink systems prove themselves with their high processing speed and good print quality. They are safe for the environment and odorless. High grade ink systems, such as Aqua-Jet® FGL M are robust and suitable for outdoor use.
Aqua-Jet® FGL
Universal ink system for rigid and soft PVC, polycarbonate, wood, as well as various grades of textiles, paper, and cardboard. Can be thermoformed and it is suitable for outdoor use
- Graphical Screen Printing
- Helmets (Cycle, Equestrian, Ski)
- Paper & Card Boards
- +4
AquaTex C
Textile screen ink for various grades of cotton and synthetics (fixation at room temperature)
- Textile Screen Printing
Compare propertiesWater-Based Screen Printing Inks
applicable
basically suited
can be suited
Outdoor resistance
One-Component-Ink
Two-Component-Ink
Substrates
Acrylics
Cotton, Linen
Cotton mix
Wood
Synthetics
Paper, Cardboard
Polycarbonate
Polyester pre-treated
Polyolefine pre-treated
Polystyrene, ABS, SAN
PVC rigid
PVC plasticised
Drying
Finish
satin gloss
satin gloss
satin gloss
glossy
Outdoor resistance
short term
short term
Physical
Physically reactive
Grade of gloss
satin gloss
Auxiliaries
Defoamer
1 % L 54131
1 % L 54131
1 % L 36273
1% L 36273
Crosslinker
max. 20%
2% Crosslinker WB 001
2% Crosslinker WB 001
2% Crosslinker WB 001
L 47716
max. 20%
max. 20%
max. 20%
Thinner
10% Water
10% Water
5 - 10% Water
print ready
3 - 5% Water / 3 - 5% AquaTex Thinner
Retarder
VZ 100
nicht geeignet
max. 5%
max. 5%
max. 5%
DownloadsWater-Based Screen Printing Inks
- Application Chart for Water-Based Screen Printing Inks1 MB
- Auxiliary Products for Water-Based Screen Printing Inks - 09/201945 KB
- Printing with Water-Based Screen Printing Inks - 09/2019200 KB
- Product Range Water-Based Screen Printing Inks - 09/20192 MB
- General Information on Screen Printing Inks - 09/201964 KB
- Form for Technical Inquiries688 KB
