Screen Printing Systems for GlassSolvent-Based Screen Printing Inks

NoriGlass TPI 930 Titanium White

NoriGlass TPI 930 Titanium White

Get in touch
Choose a category

TPI – Touch Panel Ink

  • Very high Optical Density: 
    • OD ~ 1 @ 30 μm Layer Thickness
    • OD ~ 5 if back-printed with Gray TPI 748/015 (x-rite 361T Densitometer)
  • Very high Degree of Whiteness: 
    • L* ~ 89; b* ~ – 0,2; through Gorilla-Glass 0.6 mm, back-printed with Gray TPI 748/015 (x-rite color i 7)
  • Very high Surface Free Energy: (  Very good bondability.)
    • σ total ~ 50 mN/m
    • σ disperse ~ 45 mN/m
    • σ polar ~ 5 mN/m
    • (Krüss MSA; H2O/Diiodomethane)

NoriGlass TPI 930’s properties allow the best possible realization of touch panels (white frame) or capacitive touch switches.

If back-printed, the cured ink layer is opaque and convinces with its pure white color-shade.

 

Further information can be found in our technical data sheets in the Downloads section

PropertiesNoriGlass TPI 930 Titanium White
One-Component-Ink
Two-Component-Ink
Three-Component-Ink
Substrates
Acrylics
Coated Substrates
Thermosets
Glass / Ceramics
Wood
Metal / nonferrous Metal
Paper
Polyamide
Polycarbonate
Polyester untreated
Polyester pre-treated
Polyethylene pre-treated
Polypropylene untreated
Polypropylene pre-treated
Polystyrene, ABS, SAN
PVC rigid
PVC plasticised
Drying
Slow
Medium
Fast
Grade of gloss
glossy
matt
satin gloss
Further processing
outdoor resistant
heat curable up to °C
high frequency sealing
heat sealing
thermo forming
ApplicationsNoriGlass TPI 930 Titanium White
Printing Technique
+49 9141 906-674
Pröll GmbH, Zentrale
+49 9141 906-0 info@proell.de